EMBETO ELECTRONICS

Tagged in

hacking

Hacking

reflowster

electrical oven hacked into a DIY reflow oven with a thermal profile optimized for lead alloys developed for the Embeto Electronics Workspace

LaserHarp Design
Hacking

laser harp

laser harp with 8 laser strings each producing a different audio tone when activated by the wave of a user’s hand

Hacking

sigGen 200

signal generator with multiple waveforms, variable amplitude and offset and a frequency output up to 200 kHz enclosed in a 3D printed case

Hacking

Dexter v2

SLAM robot equipped with omni-wheels, RPLIDAR 360 degrees, four 60 RPM motors with encoders, and a 2800mAh Ni-Mh rechargeable battery

Hacking

soundwaze

LED VU Meter with two potentiometers for fine-tuning sound threshold and sensitivity, a Li-Po battery, and an on-board charging circuit

Hacking

zgomotron

circuit boards for a noise-producing device changing its frequency with the light level in the room used as workshop material

Dexter V1 Design
Hacking

Dexter v1

laser cut perspex chassis small semi-autonomous robot based on Arduino Leonardo later used as a starting point for Dexter v2

Hacking

slither DOT

retro slither game with a high-speed option, non-volatile function for storing high-scores and a Li-Po battery with 10 LEDs level indicator

Mealy Counter Prototype
Uncategorized

mealy counter

decimal counter with load and reset functions using nothing more than digital circuits such as gates, inverters, decoders, and seven segment displays

Hacking

sequenster

step sequencing device hardware tool which divides a measure of music into a pre-determined number of note values called “steps”

Menu